Radium Engineering V2 Quick Connect, 19MM Male to 10AN Female, Straight (M54/N54)
£28.74
14-0363 V2 QUICK CONNECT, 19MM FEMALE 10AN MALE STRAIGHT
This fitting adapts the male side of a 19mm V2 quick connect to 10AN male.
Engine Compatibility
-Audi A4 (2.0L TSI)
-Audi A5 (2.0L TSI)
-Audi A6 (2.0L TSI)
-Audi TT (2.0L TSI)
-BMW 135i/335i/535i/740i (N54)
-BMW 325i/330i/525i/530i/X3/Z3/Z4 (M54)
-Ford Fiesta ST/Focus/Escape/Fusion (1.6L EcoBoost)
-VW Beetle (2.0L TSI/VR6)
-VW Corrado (VR6)
-VW Golf GTI MK6 (2.0L TSI)
-VW Jetta (2.0L TSI)
-VW Phaeton (VR6)
-VW Tiguan (2.0L TSI)
*These adapters are compatible with many engines not listed.
Machined from 6061 billet aluminium. For corrosion protection, they are anodized type-II.
- Description
- Additional information
Description
V2 Quick Connect fittings are found on many OEM vehicles including BMW, VW, Audi, Lamborghini, Ford, Porsche, SEAT, Mercedes, etc.
These Radium Engineering fittings are used with many crankcase ventilation and turbo inlet connectors. They are primarily used for air/oil separation catch cans.
MEASUREMENT
No exact measurement from the actual fitting determines the size (in millimetres). The number associated with the “size” is actually the inner diameter of the tube (or hose) that will be installed onto the fitting. Shown below is a 19mm V2 quick connect fitting. NOTE: it is not necessarily the ID or the OD of the fitting. The size will be in between these 2 values.
IMPORTANT: Always lubricate the mating O-rings with a light amount of oil prior to installing.
Additional information
| Kit Format | Catch Can Kit Only, Catch Can with Drain Petcock Kit |
|---|
