KPower K24Z Hybrid Timing Chain Cover
£394.80 – £406.80
KPower’s cast aluminium timing chain cover for K24Z engines unlocks the potential of the K24Z3 and K24Z7 engines for swapped vehicles.
This cover is a direct replacement for the OEM K24Z part, but it has a provision for a K20A/K24A crank position sensor. This hybrid cover allows you to run a K24Z engine in any K-swapped vehicle running Hondata Kpro or KTuner without needing to deal with the newer style crank trigger wheel and the immobilizers in the new ECUs.
Since the rest of the K24A sensors can swap onto a K24Z engine, this cover provides the final piece of the puzzle to take advantage of the available used K24Z engines.
Best of all, this cover is available in two configurations: the standard option is for a full K24Z engine with the factory R40 head, but KPower has also created a variation that allows the older four exhaust port traditional K series heads to be mated to a K24Z block. A PRB, RBB, or RBC head can now easily be installed on a K24Z engine, unlocking the potential of the K24Z bottom ends for many applications.
The K24Z engines have the highest compression pistons (11:1) and strongest rods of any K24 block, so this is an exciting new engine block option for the K swap community.
This cover includes a new crank seal, new O-ring, new lower OEM lower shoulder bolts, and a full replacement bolt set (M6 and M10). Customers using this cover in a FWD application will need to also add a set of spacers so the factory FWD engine mount bracket can be bolted on with the factory M10 bolts – select in the options.
If using this cover with Hondata Kpro, customers will need to pair this cover with the following Honda parts:
Crankshaft pulse plate: 13622-PNA-003
Crankshaft position sensor: 37500-RAA-A01 (K24 style) or 37500-PNB-003 (K20 style)
Exhaust camshaft pulse plate: 14114-PNA-003
For other sensor and connector differences between the K24A and K24Z, please see KPower’s K24Z3 Miata Installation Guide.
- Description
- Additional information
Description
KPower’s cast aluminium timing chain cover for K24Z engines unlocks the potential of the K24Z3 and K24Z7 engines for swapped vehicles.
This cover is a direct replacement for the OEM K24Z part, but it has a provision for a K20A/K24A crank position sensor. This hybrid cover allows you to run a K24Z engine in any K-swapped vehicle running Hondata Kpro or KTuner without needing to deal with the newer style crank trigger wheel and the immobilizers in the new ECUs.
Since the rest of the K24A sensors can swap onto a K24Z engine, this cover provides the final piece of the puzzle to take advantage of the available used K24Z engines.
Best of all, this cover is available in two configurations: the standard option is for a full K24Z engine with the factory R40 head, but KPower has also created a variation that allows the older four exhaust port traditional K series heads to be mated to a K24Z block. A PRB, RBB, or RBC head can now easily be installed on a K24Z engine, unlocking the potential of the K24Z bottom ends for many applications.
The K24Z engines have the highest compression pistons (11:1) and strongest rods of any K24 block, so this is an exciting new engine block option for the K swap community.
This cover includes a new crank seal, new O-ring, new lower OEM lower shoulder bolts, and a full replacement bolt set (M6 and M10). Customers using this cover in a FWD application will need to also add a set of spacers so the factory FWD engine mount bracket can be bolted on with the factory M10 bolts – select in the options.
If using this cover with Hondata Kpro, customers will need to pair this cover with the following Honda parts:
Crankshaft pulse plate: 13622-PNA-003
Crankshaft position sensor: 37500-RAA-A01 (K24 style) or 37500-PNB-003 (K20 style)
Exhaust camshaft pulse plate: 14114-PNA-003
For other sensor and connector differences between the K24A and K24Z, please see KPower’s K24Z3 Miata Installation Guide.
Additional information
Cylinder Head | R40 head (full K24Z engine), PRB/RBB/RBC head (hybrid engine builds) |
---|---|
FWD Spacers | Without FWD mount spacers, With FWD mount spacers |